We have a number of profiles including Speed Deck Ultra^®, Monoclad^®, Longspan^® and CapacityPLUS™660. Our technical services consultants can provide you with advice to help you select the best profile for your project.

Yes you can, but water should not drain from the COLORBOND^® material to the galvanised material. However, it is okay for water to drain from the galavanised material to the COLORBOND^® material.

COLORBOND^® Ultra or Stramit products coated with MagnaFlow^® offer the best protection against corrosion.

No you can’t as our purlins are not tested for floor loads. Check out our flooring system which can be used for decks, verandahs, mezzanines and other flooring applications.

Of course. If you don't have an account with us, contact your local Stramit office for further information.

We have offices in every state and territory of Australia. Please refer to our office locations to find one near you.

No we don’t, but our full product range is displayed on our website. If you’re a current customer, you can contact your account manager to organise samples.

Contact your local Stramit office and they’ll talk you through the process.

Contact your local Stramit office for further information.  

Yes. As a Stramit account holder you have that option. Your account manager will be able to confirm product availability or suitable alternatives available in other states. They’ll also tell you about expected lead times and delivery charges that may apply if you go with these options.

It depends on the product you order and where you’re ordering from. In general, roofing and rainwater products have a 48-hour lead time. Our Melbourne, Brisbane and Perth offices can provide a 24-hour service on some products.  Structural products, such as purlins, can have up to a 5-day lead time. If you're ordering outside a metropolitan area, you’ll also need to factor in delivery time on some products.Please refer to the Product and Service Guide for your area, or contact your account manager or local Stramit office for more information.

For standard delivery (48 hours notice) of standard lead-time roofing and rainwater products, the order cut-off time is 4pm. In Darwin it is 3.30pm. Next day delivery of standard lead time products can be organised with our Melbourne, Brisbane and Perth offices. The order cut-off time for next day delivery from these offices is 12.30pm. 

Refer to the Stramit Product and Service Guide for your area. You can also contact your account manager or local Stramit office if you can’t find what you’re looking for, or need more information.

Yes you can. Please refer to our reseller locator to find a business near you.

Most of Stramit’s building products are made from Bluescope Steel. We also use specialty materials that are not produced in Australia like ZAM® from Japan, and MagnaFlow® from New Zealand to make our structural or roofing products even more durable. All of our products come with material warranties.

Most Stramit products are available in the full range of COLORBOND^® steel colours. Other colours, including gloss finish, are stocked at some locations. Please check with your local Stramit office or supplier for availability in your area.

Refer to the Product and Service Guide for your area or contact your local Stramit office.

It depends on your location. Please refer to the Product and Service Guide for your area or contact your local Stramit office.

Yes, and it’s available in polycarbonate and fibreglass.

Shadow Grey.

This depends on your location. In Queensland all ridge and hip flashings are scribed – or cut – to suit the cladding they sit on as this gives maximum protection from the rain. In other states, the capping often (but not always) simply sits on the top of the corrugated cladding. Industrial sheets are usually scribed.

A map showing our delivery routes is in our Product and Service Guide. Please refer to the guide for your area.

It depends where you live and what you’ve ordered. Delivery costs are listed in our Product and Service Guides. Please refer to the guide for your area.

Yes you can. Your safety is important to us so we require you to wear appropriate PPE gear when loading your vehicle. We’ll also check that your vehicle is suitable for loading. Please refer to the loading tips we've prepared. 

Technical information can be found in our product profiles, our Product and Service Guides, or our Product Technical Manuals.  Contact our technical services consultants if you require more information or advice. 

All of Stramit’s products come with a warranty on the quality and expected life of material used, subject to them being properly installed and maintained. If you think you’re eligible to make a warranty claim, contact your local Stramit office and they’ll help you get the investigation started.

All of our profiles are featured in the products section of our website. If you need more information, contact your account manager or local Stramit office. 

Tolerances vary from product to product. Our roofing profiles have tolerances of ±4mm on width and 0-15mm on length. Purlins are supplied with section sizes to ±1mm and a length tolerance of 0-10mm. Refer to the Product and Service Guide for your area or contact our technical services consultants if you require more information or advice.

COLORBOND^® Ultra or Stramit products coated with MagnaFlow^® offer the best protection against corrosion.

We have a number of profiles including Speed Deck Ultra^®, Monoclad^®, Longspan^® and CapacityPLUS™660. Our technical services consultants can provide you with advice to help you select the best profile for your project.

Yes you can, but water should not drain from the COLORBOND^® material to the galvanised material. However, it is okay for water to drain from the galavanised material to the COLORBOND^® material.

Of course. If you don't have an account with us, contact your local Stramit office for further information.

We have offices in every state and territory of Australia. Please refer to our office locations to find one near you.

No we don’t, but our full product range is displayed on our website. If you’re a current customer, you can contact your account manager to organise samples.

Contact your local Stramit office and they’ll talk you through the process.

Contact your local Stramit office for further information.  

Yes. As a Stramit account holder you have that option. Your account manager will be able to confirm product availability or suitable alternatives available in other states. They’ll also tell you about expected lead times and delivery charges that may apply if you go with these options.

It depends on the product you order and where you’re ordering from. In general, roofing and rainwater products have a 48-hour lead time. Our Melbourne, Brisbane and Perth offices can provide a 24-hour service on some products.  Structural products, such as purlins, can have up to a 5-day lead time. If you're ordering outside a metropolitan area, you’ll also need to factor in delivery time on some products.Please refer to the Product and Service Guide for your area, or contact your account manager or local Stramit office for more information.

For standard delivery (48 hours notice) of standard lead-time roofing and rainwater products, the order cut-off time is 4pm. In Darwin it is 3.30pm. Next day delivery of standard lead time products can be organised with our Melbourne, Brisbane and Perth offices. The order cut-off time for next day delivery from these offices is 12.30pm. 

Refer to the Stramit Product and Service Guide for your area. You can also contact your account manager or local Stramit office if you can’t find what you’re looking for, or need more information.

Yes you can. Please refer to our reseller locator to find a business near you.

Most of Stramit’s building products are made from Bluescope Steel. We also use specialty materials that are not produced in Australia like ZAM® from Japan, and MagnaFlow® from New Zealand to make our structural or roofing products even more durable. All of our products come with material warranties.

Tolerances vary from product to product. Our roofing profiles have tolerances of ±4mm on width and 0-15mm on length. Purlins are supplied with section sizes to ±1mm and a length tolerance of 0-10mm. Refer to the Product and Service Guide for your area or contact our technical services consultants if you require more information or advice.

Most Stramit products are available in the full range of COLORBOND^® steel colours. Other colours, including gloss finish, are stocked at some locations. Please check with your local Stramit office or supplier for availability in your area.

Refer to the Product and Service Guide for your area or contact your local Stramit office.

Shadow Grey.

This depends on your location. In Queensland all ridge and hip flashings are scribed – or cut – to suit the cladding they sit on as this gives maximum protection from the rain. In other states, the capping often (but not always) simply sits on the top of the corrugated cladding. Industrial sheets are usually scribed.

A map showing our delivery routes is in our Product and Service Guide. Please refer to the guide for your area.

It depends where you live and what you’ve ordered. Delivery costs are listed in our Product and Service Guides. Please refer to the guide for your area.

Yes you can. Your safety is important to us so we require you to wear appropriate PPE gear when loading your vehicle. We’ll also check that your vehicle is suitable for loading. Please refer to the loading tips we've prepared. 

Technical information can be found in our product profiles, our Product and Service Guides, or our Product Technical Manuals.  Contact our technical services consultants if you require more information or advice. 

All of Stramit’s products come with a warranty on the quality and expected life of material used, subject to them being properly installed and maintained. If you think you’re eligible to make a warranty claim, contact your local Stramit office and they’ll help you get the investigation started.

All of our profiles are featured in the products section of our website. If you need more information, contact your account manager or local Stramit office. 

No you can’t as our purlins are not tested for floor loads. Check out our flooring system which can be used for decks, verandahs, mezzanines and other flooring applications.

Yes, and it’s available in polycarbonate and fibreglass.

We have a number of profiles including Speed Deck Ultra^®, Monoclad^®, Longspan^® and CapacityPLUS™660. Our technical services consultants can provide you with advice to help you select the best profile for your project.

COLORBOND^® Ultra or Stramit products coated with MagnaFlow^® offer the best protection against corrosion.

We have offices in every state and territory of Australia. Please refer to our office locations to find one near you.

No we don’t, but our full product range is displayed on our website. If you’re a current customer, you can contact your account manager to organise samples.

Contact your local Stramit office and they’ll talk you through the process.

Contact your local Stramit office for further information.  

Yes. As a Stramit account holder you have that option. Your account manager will be able to confirm product availability or suitable alternatives available in other states. They’ll also tell you about expected lead times and delivery charges that may apply if you go with these options.

It depends on the product you order and where you’re ordering from. In general, roofing and rainwater products have a 48-hour lead time. Our Melbourne, Brisbane and Perth offices can provide a 24-hour service on some products.  Structural products, such as purlins, can have up to a 5-day lead time. If you're ordering outside a metropolitan area, you’ll also need to factor in delivery time on some products.Please refer to the Product and Service Guide for your area, or contact your account manager or local Stramit office for more information.

For standard delivery (48 hours notice) of standard lead-time roofing and rainwater products, the order cut-off time is 4pm. In Darwin it is 3.30pm. Next day delivery of standard lead time products can be organised with our Melbourne, Brisbane and Perth offices. The order cut-off time for next day delivery from these offices is 12.30pm. 

Refer to the Stramit Product and Service Guide for your area. You can also contact your account manager or local Stramit office if you can’t find what you’re looking for, or need more information.

Most of Stramit’s building products are made from Bluescope Steel. We also use specialty materials that are not produced in Australia like ZAM® from Japan, and MagnaFlow® from New Zealand to make our structural or roofing products even more durable. All of our products come with material warranties.

Most Stramit products are available in the full range of COLORBOND^® steel colours. Other colours, including gloss finish, are stocked at some locations. Please check with your local Stramit office or supplier for availability in your area.

Refer to the Product and Service Guide for your area or contact your local Stramit office.

Yes, and it’s available in polycarbonate and fibreglass.

Shadow Grey.

A map showing our delivery routes is in our Product and Service Guide. Please refer to the guide for your area.

It depends where you live and what you’ve ordered. Delivery costs are listed in our Product and Service Guides. Please refer to the guide for your area.

Technical information can be found in our product profiles, our Product and Service Guides, or our Product Technical Manuals.  Contact our technical services consultants if you require more information or advice. 

All of our profiles are featured in the products section of our website. If you need more information, contact your account manager or local Stramit office. 

No you can’t as our purlins are not tested for floor loads. Check out our flooring system which can be used for decks, verandahs, mezzanines and other flooring applications.

It depends on your location. Please refer to the Product and Service Guide for your area or contact your local Stramit office.

Refer to the Stramit Product and Service Guide for your area. You can also contact your account manager or local Stramit office if you can’t find what you’re looking for, or need more information.

Most of Stramit’s building products are made from Bluescope Steel. We also use specialty materials that are not produced in Australia like ZAM® from Japan, and MagnaFlow® from New Zealand to make our structural or roofing products even more durable. All of our products come with material warranties.

Tolerances vary from product to product. Our roofing profiles have tolerances of ±4mm on width and 0-15mm on length. Purlins are supplied with section sizes to ±1mm and a length tolerance of 0-10mm. Refer to the Product and Service Guide for your area or contact our technical services consultants if you require more information or advice.

Technical information can be found in our product profiles, our Product and Service Guides, or our Product Technical Manuals.  Contact our technical services consultants if you require more information or advice. 

Yes, and it’s available in polycarbonate and fibreglass.

This depends on your location. In Queensland all ridge and hip flashings are scribed – or cut – to suit the cladding they sit on as this gives maximum protection from the rain. In other states, the capping often (but not always) simply sits on the top of the corrugated cladding. Industrial sheets are usually scribed.

COLORBOND^® Ultra or Stramit products coated with MagnaFlow^® offer the best protection against corrosion.

We have a number of profiles including Speed Deck Ultra^®, Monoclad^®, Longspan^® and CapacityPLUS™660. Our technical services consultants can provide you with advice to help you select the best profile for your project.

Yes you can, but water should not drain from the COLORBOND^® material to the galvanised material. However, it is okay for water to drain from the galavanised material to the COLORBOND^® material.

No you can’t as our purlins are not tested for floor loads. Check out our flooring system which can be used for decks, verandahs, mezzanines and other flooring applications.

We have offices in every state and territory of Australia. Please refer to our office locations to find one near you.

Most Stramit products are available in the full range of COLORBOND^® steel colours. Other colours, including gloss finish, are stocked at some locations. Please check with your local Stramit office or supplier for availability in your area.

Shadow Grey.